Counting function (PCS), how to use it:
Press PCS to activate the counting function. The scale will then calculate the quantity based on the unit weight from the sample weighing.
Press and hold PCS for 3 seconds to enter sample weighing mode. The display shows 25 and the number blinks.
Press PCS to select the number of samples: 25, 50, 75, or 100.
Place the selected number of items on the scale.
The scale will automatically exit sample mode and switch to counting:
automatically after 10 seconds, or immediately if you press ON/OFF.
After an approved sample weighing, the unit weight is saved and used until the next sample weighing is performed.
Error message
If the items are too light to be counted correctly, the weighing fails.
The display shows Err4 and no sample weight is saved.