Tendy Scriptor - User Guide
Everything you need to get started with Scriptor.
SKU 1003 / MHT-P29L · v2.1 · May 2026
In this guide
Welcome and what's in the box
Product guide
Safety information
Quick start: power and buttons
Installing the battery
Loading the label roll
Connect to the Tendy app
Printing labels
Cleaning and maintenance
Troubleshooting
Technical specifications
Radio information
EU declaration of conformity
Waste disposal: WEEE and battery
Warranty and consumer rights
Contact
1. Welcome and what's in the box
Thank you for choosing Scriptor. It is a Bluetooth thermal label printer that makes labeling your game meat simple. Pair it with the Tendy app, print a label, and attach it to the bag.
This guide covers setup, safety, daily use, and what to do if something stops working. Keep it near the printer.
In the box
Scriptor label printer
USB-C charging cable
USB-C power adapter (EU Type C / F plug)
One starter roll of labels (approx. 130 labels)
This user guide
Something missing?
If anything is missing from the box, contact [email protected] before using the device.
2. Product guide
Buttons
1. Power - On/off.
2. Function - Menu.
3. Feed - Paper feed.
Connections
4. Port cover.
5. USB-C port.
Other
6. Display.
7. Paper compartment latch.
8. Hook.
9. Battery latch.
3. Safety information
Intended use. Scriptor is a thermal label printer for non-professional indoor use. It pairs with the Tendy app over Bluetooth and prints labels. Any other use is outside the intended use.
Symbols on the device and packaging
Indoor use only
Not intended for children under 8 years
The print head gets hot
Lithium-ion battery
Read the manual first
Keep dry
CE compliance
WEEE collection
Battery and charging
Charge only with the included USB-C adapter (5 V / 1 A) or an equivalent CE-marked adapter. Do not crush, puncture, heat above 60 °C, submerge in liquid, or incinerate the battery. Stop using the device if the battery swells, leaks, or becomes hot.
Print head and service
The print head gets hot during use and remains hot for a short time afterward. Do not touch it with bare fingers. There are no user-serviceable parts other than the battery and label roll. For service, contact [email protected].
4. Quick start: power and buttons
Turning the device on and off
Turn on. Press and hold the power button for 2 seconds. The display lights up.
Turn off. Press the power button twice quickly in succession.
What the buttons do
Power. On/off, and "save and exit" when inside the menu.
Function. Press and hold to open the settings menu. Press to scroll between menu options.
Feed. Advances the label by one. Inside the menu, it changes the value of the current setting.
5. Installing the battery
Always make sure the printer is turned off before inserting or removing the battery.
Insert the battery
Open the battery cover on the back of the printer (next to the hook).
Insert the battery in the direction indicated by the arrow on the compartment.
Press down gently and slide the battery latch forward until it clicks into place.
Remove the battery
Turn off the device.
Press the battery latch to release the battery.
Lift the battery out in the opposite direction to the installation arrow.
About charging
The included USB-C adapter is 5 V / 1 A. A full charge from empty takes approximately 4 hours. Do not leave the printer charging overnight unattended.
6. Loading the label roll
Press the paper compartment latch and open the cover.
Remove the old roll and any test paper.
Place the new roll so that the label side faces upward and feeds toward the print head. The small angle on the roll should point upward.
Pull out the first label halfway and then close the cover. The printer will align itself automatically.
Cut or tear off any excess paper.
Use the correct rolls
Use Tendy label rolls 76x50 or 76x76 for best results. Third-party rolls may produce inferior results and damage the device.
7. Connect to the Tendy app
The Tendy app pairs with Scriptor over Bluetooth and is where you design and send labels.
Download the app
Search for Tendy on Google Play or App Store, or scan the QR codes in the printed user guide that came in the box.
Getting started
Open the Tendy app and log in with email, Google, or Apple.
Turn ON Bluetooth on your phone.
When the app asks, grant Bluetooth permission to Tendy.
Turn on Scriptor (hold the power button for 2 seconds) and tap Connect to new device in the app.
8. Printing labels
Once Scriptor is paired, all label design takes place in the Tendy app. The printer only prints what the app sends to it.
Print a label
In the app, tap the ( + ) sign in the middle
Then tap "print"
Select what you want to print (animal/fish/berries/mushrooms etc., then the cut)
The data will automatically populate your label. You can add or change the information as desired. Here you can also choose which template to use and what label size you prefer.
Tap Print. Scriptor prints in 1–2 seconds.
10. Cleaning and maintenance
Routine cleaning
Turn off the printer and unplug the USB-C before cleaning.
Wipe the outside with a dry, soft cloth.
For the print head: wait until it has cooled down. Wipe gently with a cotton swab lightly moistened with isopropyl alcohol. Allow it to air dry before closing the cover.
Do not pour liquid into the paper compartment or onto the print head.
What to avoid
Solvents, acetone, bleach, abrasive cleaners
Submerging the device in water
Storage at temperatures outside -20 °C to 60 °C
Direct sunlight for extended periods (thermal paper darkens)
Long-term storage
If you are not going to use Scriptor for more than a month, charge it to approximately 50 %, turn it off, and store it in a cool and dry place. Top it up every three months to keep the battery in good condition.
11. Troubleshooting
Having trouble with your Tendy Scriptor?
Visit the support page for Tendy Scriptor to find answers to most questions. The support page with guides for finding and solving your problem can be found HERE.
If you are still having problems, we ask that you print a "self-test" and send it to us via email or chat so we can help you further.
Guide on how to print a self-test: HERE
Still can't get it sorted?
Email [email protected] and we will help you.
12. Technical specifications
Print method - Thermal printing
Paper width - 80 mm
Print width - 76 mm
Print density - 576 dots / line
Print speed - 50–90 mm / s
Resolution - 203 dpi
Interface - USB-C + Bluetooth 5.0
Paper thickness - 0.06–0.08 mm
Print command - TSPL
Character size - 24 × 24
Buffer - 256 KB
Power adapter - Input AC 100–240 V / Output DC 9 V / 1 A
Battery - Lithium-ion 2600 mAh / 7.4 V / 19.24 Wh (rechargeable)
Charging time - Approx. 4 hours from empty
Compatible app - Tendy app (iOS, Android)
Operating environment - 0 °C to 50 °C, humidity 20 % – 85 %
Storage environment - -20 °C to 60 °C, humidity 5 % – 95 %
Dimensions - 132 × 115 × 61 mm
Weight - 500 g (with battery)
13. Radio information
Pursuant to Annex II of Radio Equipment Directive 2014/53/EU.
Radio technology - Bluetooth 5.0 Low Energy
Frequency band - 2402–2480 MHz (2.4 GHz ISM band)
Maximum RF output power - 20 dBm (100 mW) EIRP
Modulation - GFSK / π/4-DQPSK / 8DPSK
Intended use -Pairing with the Tendy app on a phone or tablet for short-range label printing
Geographic coverage - EU and EEA member states, without geographic restriction
Cybersecurity (RED 3.3 d/e/f)
Scriptor does not connect to the internet and stores no personal data on the device. Bluetooth pairing requires user confirmation in the Tendy app. Firmware updates are signed and delivered via the app. Scriptor is designed to comply with the standards in the EN 18031 series pursuant to RED articles 3.3(d), (e), (f).
The complete technical documentation as well as EMC and radio test reports are held by Tendy AB and can be made available upon reasonable request to competent authorities via [email protected].
14. EU declaration of conformity
Simplified EU declaration of conformity pursuant to Article 10(9) of Directive 2014/53/EU. The full DoC is available at support.tendy.se/sv/articles/14893634-scriptor-declaration-of-conformity.
EN. Hereby, Tendy AB declares that the radio equipment type Tendy Scriptor is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: tendy.se/doc/scriptor
SV. Härmed försäkrar Tendy AB att denna typ av radioutrustning Tendy Scriptor överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på: tendy.se/doc/scriptor
NO. Tendy AB erklærer herved at radioutstyret av typen Tendy Scriptor er i samsvar med direktiv 2014/53/EU. Den fullstendige teksten i EU-samsvarserklæringen er tilgjengelig på: tendy.se/doc/scriptor
DA. Hermed erklærer Tendy AB, at radioudstyrstypen Tendy Scriptor er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på: tendy.se/doc/scriptor
FI. Tendy AB vakuuttaa, että radiolaitetyyppi Tendy Scriptor on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla osoitteessa: tendy.se/doc/scriptor
DE. Hiermit erklärt Tendy AB, dass der Funkanlagentyp Tendy Scriptor der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist verfügbar unter: tendy.se/doc/scriptor
PL. Tendy AB niniejszym oświadcza, że typ urządzenia radiowego Tendy Scriptor jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE dostępny jest pod adresem: tendy.se/doc/scriptor
FR. Le soussigné, Tendy AB, déclare que l'équipement radioélectrique du type Tendy Scriptor est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à : tendy.se/doc/scriptor
ES. Por la presente, Tendy AB declara que el tipo de equipo radioeléctrico Tendy Scriptor es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en: tendy.se/doc/scriptor
IT. Il fabbricante, Tendy AB, dichiara che il tipo di apparecchiatura radio Tendy Scriptor è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione UE di conformità è disponibile al: tendy.se/doc/scriptor
15. Waste disposal: WEEE and battery
The crossed-out wheelie bin symbol means the device must not be disposed of as household waste anywhere in the EU/EEA. Drop it off at a collection point for waste electrical and electronic equipment (WEEE) when it reaches end of life. Recycle the packaging separately according to local rules. Sort cardboard with paper, plastic film with plastics, and any metal parts separately. In France, the Triman logo and the Info-Tri sorting guide apply to the packaging.
Remove the battery before disposal
Turn off the printer.
Open the battery compartment (see section 5).
Drop off the printer and battery separately at your local recycling station. Many municipal recycling centers accept both.
Waste information in your language
EN. Separate collection for WEEE and batteries.
SV. Separat insamling för elektronik och batterier.
NO. Sortér elektronikk og batterier separat.
DA. Separat indsamling for elektronik og batterier.
FI. Elektroniikka ja paristot kerätään erikseen.
DE. Elektronik und Batterien getrennt entsorgen.
PL. Selektywna zbiórka elektroniki i baterii.
FR. Collecte séparée pour DEEE et piles.
ES. Recogida selectiva para RAEE y pilas.
IT. Raccolta separata per RAEE e batterie.
16. Warranty and consumer rights
Standard warranty.
Tendy AB warrants Scriptor against defects in materials and workmanship for 12 months from the date of purchase, provided normal use and compliance with the conditions in this guide. Keep your receipt as proof of purchase.
What is covered.
Manufacturing defects that affect normal function. We will repair the product, replace it, or provide a refund at our discretion.
What is not covered.
Damage from accidents, drops, liquids, unauthorized repairs, normal wear and tear, or use outside the intended use described in section 3.
Your statutory rights
This warranty does not affect your statutory rights as a consumer under EU law and national law. Some markets grant you stronger rights than our standard warranty:
Sweden. 3-year right of complaint under the Consumer Purchase Act.
Norway. Up to 5 years under the forbrukerkjøpsloven for products intended to last a long time.
Finland. Reasonable lifespan under the kuluttajansuojalaki.
Germany, Denmark, Poland, France, Spain, Italy. 2-year conformity guarantee under Directive (EU) 2019/771.
In all cases, the longer of the two periods applies. To initiate a case, email [email protected] with your order number and a brief description.
17. Contact
Tendy AB
Roslagsgatan 32 · 115 33 Stockholm · Sweden
Org.nr 559477-9778
[email protected]
tendy.se