Tendy Slaktset - User Guide
A complete set for butchering and processing game: three knives in 5CR15MOV steel, a sharpening steel and a case.
SKU 1011 · v1.0 · May 2026
In the box
Butcher knife (1)
Boning knife (2)
Gut hook (3)
Sharpening steel (4)
Nylon storage case (5)
This guide
Missing something? Email [email protected] before using the product.
Safety
The blades are very sharp. Always cut away from your body and keep your fingers behind the edge.
Cut on a stable surface or a cutting board.
Check that the blades and handles are intact before each use.
Carry and store the knives in the case.
Keep out of reach of children. Recommended for ages 18 and over.
Improper use may cause serious cuts.
Using the knives
Gut hook: opens the belly with the hook without puncturing the innards.
Butcher knife: skins and breaks down the carcass. The curved blade follows the shape of the carcass.
Boning knife: cuts around bones and joints.
Let the edge do the work with long, calm strokes instead of pressing hard.
Honing the edge
The sharpening steel realigns the edge between sharpenings. Place the edge against the steel at about a 20-degree angle and draw the knife towards you, alternating sides for each stroke. When the steel no longer helps, the knife needs sharpening with a whetstone. The steel is 56-58 HRC.
Cleaning, storage and hygiene
Hand wash in warm water right after use. Do not put it in the dishwasher.
Dry the knives and the sharpening steel immediately. The steel is carbon steel and rusts if stored damp.
Do not use abrasives, bleach or steel wool.
Wash before first use and clean thoroughly after contact with raw meat.
Store dry and in the case. Wipe the case with a damp cloth and let it air dry.
The knife blades are intended for food contact and comply with Regulation (EC) No 1935/2004.
Technical specifications
Part | Total length | Blade length | Blade width | Blade thickness |
Butcher knife | 284 mm | 152 mm | 21 mm | 3 mm |
Boning knife | 260 mm | 128 mm | 19 mm | 3 mm |
Gut hook | 226 mm | 95 mm | 21 mm | 2.5 mm |
Handle, all knives: 132 × 37 × 19 mm
Sharpening steel: total 305 mm, rod 200 mm (Ø 10 mm), handle 105 mm
Case: 320 × 230 mm
Blade steel: 5CR15MOV, hardness 56-58 HRC
Knife handle: TPR. Sharpening steel: carbon steel with PP handle. Case: nylon.
Materials and compliance
Food contact: the blades comply with Regulation (EC) No 1935/2004.
Chemicals: the materials comply with REACH, Regulation (EC) No 1907/2006.
Product safety: covered by the GPSR, Regulation (EU) 2023/988. The product is manufactured outside the EU and the responsible person in the EU is the importer Tendy AB (see Contact). Keep the art. no and batch number from the packaging for contact or claims.
Origin: Made in China. Designed in Sweden.
Knives are not CE marked. Technical documentation and the food-contact declaration are held by Tendy AB and provided to competent authorities on reasonable request via [email protected].
Waste and packaging
Recycle the packaging according to local rules. Sort cardboard as paper and plastic as plastic. In France, the Triman logo and the Info-Tri guide apply to sorting.
When the knives and sharpening steel are worn out, hand them in for metal recycling. Sort the case as plastic or residual waste according to local rules. Wrap sharp blades so no one is injured when handling them.
Warranty and consumer rights
Tendy AB provides a 12-month warranty against defects in materials and workmanship from the date of purchase, with normal use and care according to this guide. Keep your receipt as proof of purchase. The warranty does not cover normal edge wear, stains or rust from poor care, or improper use.
Your statutory rights. The warranty does not affect your statutory rights as a consumer. Some countries give you stronger rights than our warranty:
Sweden: three-year right to claim under the Consumer Sales Act.
Norway: up to 5 years under the Consumer Purchases Act for goods intended to last a long time.
Finland: reasonable lifespan under the Consumer Protection Act.
Germany, Denmark, Poland, France, Spain, Italy: 2-year guarantee of conformity under Directive (EU) 2019/771.
The longer period applies. To open a case, email [email protected] with your order number and a short description.
Contact
Tendy AB
Roslagsgatan 32 · 113 55 Stockholm · Sweden
Reg. no 559477-9778
[email protected]
tendy.se
More guides and answers are available on the Tendy support site.